Burn Intensity for the 1994 Rabbit Creek Fire within Boise National Forest, Idaho

Burn Intensity for the 1994 Rabbit Creek Fire within Boise National Forest, Idaho

Frequently-asked questions:


What does this data set describe?

Title:
Burn Intensity for the 1994 Rabbit Creek Fire within Boise National Forest, Idaho

Abstract:
This data set reflects fire intensity as measured by canopy scorch for the Rabbit Creek Fire within Boise National Forest, Idaho.

Supplemental information:
Procedures_Used:
Field crews surveyed fire area (ground and air).  Islands < 40 acres usually not mapped.  Burn polygons drawn on paper copies 7 1/2 minute USGS topographical maps, then remanuscripted 1:24000 stable mylar.  Area mapped at 2 different intervals.  There was some overlap between data set.  Manuscript sets were digitized seperately and resulting coverages appended. Where discrepancies occurred, new polygons were created and attributed with the more severe burn intensity.  Digitized Arc-Info RMSE .003, clean weed 10.  Fire perimeter also collected with gps from a helicopter (wilderness portion not flown).  Perimeter collected with gps was used to modify field collected information.  "Burn polygons" outside the gps perimeter deleted from final burn intensity cover.  In general the perimeter derived from burn intensity mapping and the perimeter collected with gps agreed.

Reviews_Applied_to_Data:
Manuscripts compared with field maps to check for line and attribute accuracy.

  1. How should this data set be cited?

    Boise National Forest GIS staff, Unknown, Burn Intensity for the 1994 Rabbit Creek Fire within Boise National Forest, Idaho: Boise National Forest GIS Staff, Boise, ID, USA.

    Online links:
  2. What geographic area does the data set cover?

    Bounding coordinates:
    West: -115.71199743
    East: -115.10198304
    North: 44.13210614
    South: 43.75324036

  3. What does it look like?

    http://insideidaho.org/data/BNF/image/rabbfire_bnf_bnf.gif (GIF)
    Simple image of the data set at full extent

    Thumbnail image:

  4. Does the data set describe conditions during a particular time period?

    Calendar date: 1994
    Currentness reference:
    ground condition

  5. What is the general form of this data set?

    Geospatial data presentation form: vector digital data

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

      This is a Vector data set. It contains the following vector data types (SDTS terminology):
      • Point (173)
      • String (436)
      • GT-polygon composed of chains (174)
      • Point (224)

    2. What coordinate system is used to represent geographic features?

      The grid coordinate system used is Universal Transverse Mercator

      Universal Transverse Mercator
      UTM zone number: 11
      Transverse Mercator projection parameters:
      Scale factor at central meridian: 0.999600
      Longitude of central meridian: -117.000000
      Latitude of projection origin: 0.000000
      False easting: 500000.000000
      False northing: 0.000000

      Planar coordinates are encoded using Coordinate Pair.
      Abscissae (x-coordinates) are specified to the nearest 1.
      Ordinates (y-coordinates) are specified to the nearest 1.
      Planar coordinates are specified in meters.

      The horizontal datum used is North American Datum of 1927.
      The ellipsoid used is Clarke 1866.
      The semi-major axis of the ellipsoid used is 6378206.
      The flattening of the ellipsoid used is 1/294.9786982.

  7. How does the data set describe geographic features?

    RABBFIRE.PAT
    Polygon attribute table (Source: Field mapping by watershed)

    -
    Polygon attribute table (Source: Field mapping by watershed)
                      

    Sequential unique whole numbers that are automatically generated.

    AREA
    Area of poly/region in square coverage units (Source: Computed)
                      

    Coordinates defining the features.

    BI
    Burn Intensity, relative measure of canopy scorch (Source: See narrative description)
                      

    Positive real numbers that are automatically generated.

    Value Definition
    L, M, H, UB, gps
    See Entity_and_Attribute_Overview

    PERIMETER
    Perimeter of poly/region in coverage units (Source: Computed)
                      

    Sequential unique whole numbers that are automatically generated.

    RABBFIRE#
    Internal feature number (Source: Computed)
                      

    Sequential unique whole numbers that are automatically generated.

    RABBFIRE-ID
    User-assigned feature number (Source: User-defined)
                      

    DISS
    Item used to dissolve polygons into fire perimeter (Source: User defined)
                      

    Positive real numbers that are automatically generated.

    RAB_BI
    Unknown (Source: Unknown)
                      

    RAB_BI
    Entity and attribute overview:
    BI (burn intensity), relative estimate of fire intensity as measured by canopy scorch. Generally areas > 40 acres mapped.  Scorch canopy defined as fire killed needles and leaves that remain on trees or brush.
    
    UB - canopy not scorched.
    L - Low, < 50%. Canopy "green" with scattered scorched canopy areas.
    M - 51-100%, usually > 75%. Canopy "red", scattered black, green areas.
    H - 100%.  Canopy completely consumed.  Canopy black.
    gps - discrepancy between gps perimeter and perimeter from burn intensity mapping.  Areas within boundary collected using gps from helicopter, but outside boundary from burn intensity
    

    Entity and attribute detail citation:
    Not Available
Back to Top

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

    • Boise National Forest GIS staff

  2. Who also contributed to the data set?

  3. To whom should users address questions about the data?

    Diane McConnaughey
    Boise National Forest GIS Staff
    GIS Specialist
    1249 South Vinnell Way
    Suite 200
    
    Boise, ID 83709
    USA

    (208) 373-4247 (voice)
    dmcconnaughey@fs.fed.us
Back to Top

Why was the data set created?

The data are intended to assist efforts surrounding broad-scale forest planning for analysis in fire-recovery: soil stabilization, reestablishing vegetation, and protection of other resources such as wildlife, riparian habitat, water quality, fisheries and timber. These data should be displayed and analyzed at scales appropriate for 1:24,000-scale data. No responsibility is assumed by the Boise National Forest GIS Staff in the use of these data.

Back to Top

How was the data set created?

  1. Where did the data come from?

  2. What changes have been made?

    Date: 19940925 (change 1 of 24)
    DISSOLVE  RABBIS_D2E RABBISD2ED BI POLY

    Date: 19940925 (change 2 of 24)
    RENAME RABBISD2ED RABBIS

    Date: 19940926 (change 3 of 24)
    ARCEDIT /IMG/RCR/RABBIS

    Date: 19940926 (change 4 of 24)
    ARCEDIT /IMG/RCR/RABBIS

    Date: 19941003 (change 5 of 24)
    EXPORT COVER RABBIS RABBIS

    Date: 19950420 (change 6 of 24)
    EXTERNALALL

    Date: 19950606 (change 7 of 24)
    EXPORT COVER RABBIS RABBIS

    Date: 19950613 (change 8 of 24)
    COPY /IMG/RCR/RABBIS RBIS

    Date: 19960426 (change 9 of 24)
    DMCCONNA   DOCUMENT RBIS CREATE DMCCONNA

    Date: 19960429 (change 10 of 24)
    DMCCONNA EXPORT COVER RBIS /WRK/COV_DEV/RBIS

    Date: 19960429 (change 11 of 24)
    DMCCONNA EXPORT COVER RBIS /WRK/COV_DEV/RBIS NONE

    Date: 19960507 (change 12 of 24)
    DMCCONNA  EXPORT COVER /FIRE2/94FIRES/RBIS RBIS

    Date: 19960531 (change 13 of 24)
    DMCCONNA EXPORT COVER /FIRE2/94FIRES/RBIS RBIS NONE

    Date: 19961024 (change 14 of 24)
    DMCCONNA PROJECTDEFINE COVER RBIS

    Date: 19970204 (change 15 of 24)
    RDALEY EXPORT COVER RBIS /GIS2/SNF/TEMP/RAB_BIS

    Date: 19970708 (change 16 of 24)
    EXTERNALALL

    Date: 19970715 (change 17 of 24)
    DMCCONNA IMPORT COVER RIBS RBS

    Date: 19970715 (change 18 of 24)
    DMCCONNA RENAME RBS RBIS

    Date: 19980105 (change 19 of 24)
    DMCCONNA EXPORT COVER /FSFILES/REF/LIBRARY/GIS/BOISE/FIRE/RBIS RBIS

    Date: 19980105 (change 20 of 24)
    DMCCONNA EXPORT COVER /FSFILES/REF/LIBRARY/GIS/BOISE/FIRE/RBIS RBIS

    Date: 19980925 (change 21 of 24)
    DMCCONNA COPY RBIS /FSFILES/OFFICE/GISDEV/BNFDEV/RBIS

    Date: 19990525 (change 22 of 24)
    DMCCONNA COPY RBIS /FSFILES/REF/LIBRARY/GIS/BOISE/FIRE/RABBITCK

    Date: 20000424 (change 23 of 24)
    CKOLLENB EXPORT COVER RABBITCK RABBITCK.E00

    Date: 20000707 (change 24 of 24)
    EXPORT COVER RABBFIRE RABBFIRE_BNF_BNF.E00
    
    The orginal coverage contributed by Diane McConnaughey was imported into ARC/INFO, renamed, and exported.  The file was then compressed using GZIP.
    
    Metadata included with the original coverage (created using DOCUMENT.AML) was imported.  If the metadata was not FGDC compliant, it was updated to be compliant.
    

    Person responsible for change:
    Bruce Godfrey
    University of Idaho Library
    GIS Specialist
    PO Box 442350
    Moscow, ID 83844-2350
    USA

    208-885-6463 (voice)
    208-885-6817 (FAX)
    bgodfrey@uidaho.edu

Back to Top

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

    See Entity_Attribute_Information.  Attribute accuracy is described, where present, with each
    attribute defined in the Entity and Attribute Section.
    

  2. How accurate are the geographic locations?

    Unknown

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

    Unknown

  5. How consistent are the relationships among the observations, including topology?

    Polygon topology present.

Back to Top

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access constraints: None
Use constraints:
None

Distributor 1 of 1

  1. Who distributes the data set?

    Bruce Godfrey
    University of Idaho Library
    GIS Specialist
    PO Box 442350
    Moscow, ID 83844-2350
    USA

    208-885-6463 (voice)
    208-885-6817 (FAX)
    bgodfrey@uidaho.edu

  2. What's the catalog number I need to order this data set?

    Downloadable Data

  3. What legal disclaimers am I supposed to read?

    Although these data have been processed successfully on a computer system at the University of Idaho Library, no warranty, expressed or implied, is made regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty.

  4. How can I download or order the data?

  5. Is there some other way to get the data?

  6. What hardware or software do I need in order to use the data set?

Back to Top

Who wrote the metadata?

Dates:
Last modified: 19960429
Last reviewed: 20040527

Metadata author:
Diane McConnaughey
Boise National Forest GIS Staff
GIS Specialist
1249 South Vinnell Way
Suite 200
Boise, ID 83709
USA

(208) 373-4247 (voice)
dmcconnaughey@fs.fed.us

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata(FGDC-STD-001-1998)

Metadata extensions used:
  • http://www.esri.com/metadata/esriprof80.html

  • Back to Top