Inhabited vs. Uninhabited Areas of Idaho (2000 Census)

Inhabited vs. Uninhabited Areas of Idaho (2000 Census)

Frequently-asked questions:


What does this data set describe?

Title:
Inhabited vs. Uninhabited Areas of Idaho (2000 Census)

Abstract:
The Wildlife Spatial Analysis Lab (University of Montana) reprocessed the 2000 Census data for this assessment.  They used a sequence of GIS filters to reassign people counted by the 2000 Census to map units that were smaller than the available block-level data.  The first step involved redefining inhabited areas by excluding public lands, Plum Creek Timberlands, water features, railroad and highway corridors, steep slopes, and other local lands designated by the Census as being non-populated (e.g., commercial zones).  The population counts within the inhabited areas were then redistributed using relative weights of percent slope and distance-from-roads.  The weighting functions for slope and roads were determined using approximately 90,000 points representing homes that were obtained from county E911 databases (Kootenai and Idaho Counties, Idaho; Gallatin County, Montana) and electric meter locations provided by Flathead Electric Cooperative.  For example, analysis of these data sets suggested that 99 percent of all people live within 1-mi of a road and on slopes less than 43 percent.  Furthermore, 59 percent of all people live within 90-m of a road and on slopes less than 6 percent.  

We reprocessed the above data by clipping it to the Idaho boundary and classifying it into 6 classes.  

Supplemental information:
Intermediate data used in characaterizing Wildland Urban Interface

  1. How should this data set be cited?

    Documentation "Idaho Interagency Assessment of Wildland Fire Risk to Communities" approved by Idaho State Fire Plan Working Group. Assessment completed by Jeff Jones, Landscape Ecologist, Flathead National Forest, Idaho State Fire Plan Working Group, 2004, Inhabited vs. Uninhabited Areas of Idaho (2000 Census): U.S. Bureau of Land Management (BLM) , Boise, Idaho, USA .

    Online links:
  2. What geographic area does the data set cover?

    Bounding coordinates:
    West: -117.673696
    East: -110.513842
    North: 49.129229
    South: 41.852502

  3. What does it look like?

    Thumbnail image:

  4. Does the data set describe conditions during a particular time period?

    Calendar date: 2004
    Currentness reference:
    2004

  5. What is the general form of this data set?

    Geospatial data presentation form: map

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

    2. What coordinate system is used to represent geographic features?

  7. How does the data set describe geographic features?

Back to Top

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

    • Documentation "Idaho Interagency Assessment of Wildland Fire Risk to Communities" approved by Idaho State Fire Plan Working Group. Assessment completed by Jeff Jones, Landscape Ecologist, Flathead National Forest
    • Idaho State Fire Plan Working Group

  2. Who also contributed to the data set?

    Jeff Jones, Landscape Ecologist, Flathead National Forest; Idaho State Fire Plan Working Group 
    
    (Idaho Department of Lands; Bureau of Land Management Idaho State Office Fire and Aviation; U.S. 
    
    Forest Service)

  3. To whom should users address questions about the data?

    Bureau of Land Management, Idaho State Office
    GIS Specialist
    Bureau of Land Management, Idaho State Office
    1387 S. Vinnell Way
    Boise, ID 83709
    USA

    208-373-4000 (voice)
    Hours of Service: 8-4:30, M-F, MST
Back to Top

Why was the data set created?

These data were designed to characterize mid-scale human settlement patterns (i.e., population density) across the state of Idaho.  They were used with a  "at risk communities" point layer (buffered by 1 mile) identified by the Federal Register to characterize the wildland-urban interface.

They were developed specifically for use in characterizing relative wildland fire hazard which was then used to assess the risks of wildland fire to communities.

This dataset was used in the "Idaho Interagency Assessment of Wildland Fire Risk to Communities, 2007", but was not displayed .  It was created for the Statewide Interagency National Fire Plan Working Group to which the Bureau of Land Management (BLM), Idaho is a member.  It has also been used in other BLM planning efforts such as Resource Management Plans, Fire Management Plans, and NEPA analysis.

General Limitations

These data were designed to characterize mid-scale patterns across the state of Idaho at a scale of approximately 1:100,000.  The use of these data at scales less than 1:100,000 is not recommended without field verification.

Although the resolution of this theme is a 90-m cell, the expected accuracy does not warrant its use for geographic extents smaller than approximately 10,000 acres.  That is, these data were not designed to be used for "project level" assessments that typically require 1:24,000 scale data.

Back to Top

How was the data set created?

  1. Where did the data come from?

    Source scale denominator: Unknown
    Source contribution:
    Census 2000 data

  2. What changes have been made?

    Date: Unknown (change 1 of 2)
    We started with the data set (density101co) produced by the University of Montana, Wildlife Spatial Analysis Lab.  We clipped that data to the Idaho boundary, then classified it into 6 classes.
    

    Person responsible for change:
    Jeff Jones
    Flathead National Forest
    Landscape Ecologist
    Flathead National Forest
    1935 3rd Av. E
    Kalispell, MT 59906
    USA

    406-758-5341 (voice)
    Hours of Service: 8-4:30, M-F, MST

    Date: Unknown (change 2 of 2)
    Dataset Copied, Metadata Imported
    Source data projected from IDTM NAD27 to IDTM NAD83, nearest neighbor
    
    Project GRID in  out  # Nearest 90  (source)
     OUTPUT
     Projection    TRANSVERSE
     Datum         NAD83
     Zunits        NO
     Units         METERS
     Spheroid      GRS1980
     Xshift        0.0000000000
     Yshift        0.0000000000
     Parameters
     0.99960000 
     -114  0  0.000 
      42  0  0.000 
      2500000.00000 
      1200000.00000 
      END

    Person responsible for change:
    Bureau of Land Management, Idaho State Office
    GIS Specialist
    Bureau of Land Management, Idaho State Office
    1387 S. Vinnell Way
    Boise, ID 83709
    USA

    208-373-4000 (voice)
    Hours of Service: 8-4:30, M-F, MST

Back to Top

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

    Unknown

  2. How accurate are the geographic locations?

    Unknown

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

  5. How consistent are the relationships among the observations, including topology?

    Unknown

Back to Top

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access constraints: public
Use constraints:
No warranty is made by the Bureau of Land Management as to the accuracy, reliability, or completeness of these data for individual use or aggregate use with other data.

These data were designed to characterize human settlement patterns across the state of Idaho at a scale of approximately 1:100,000.  The use of these data at scales less than 1:100,000 is not recommended without field verification.

This data set is provided "as-is" without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness or a particular purpose.  The user assumes all responsibility for the accuracy and suitability of this dataset for a specific application.  In no event will the creators or USDA Forest Service be liable for any damages, including lost profits, lost savings, or other incidental or consequential damages arising from the use of or inability to use this data set.  Use of these data may require the ability to read ArcInfo Grid datasets.  

Although the resolution of these data is a 90-m cell, the expected accuracy does not warrant its use for geographic extents smaller than approximately 10,000 acres.  That is, these data were not designed to be used for "project level" assessments that typically require 1:24,000 scale data.

Distributor 1 of 1

  1. Who distributes the data set?

    Bruce Godfrey
    Idaho Geospatial Data Clearinghouse
    GIS Specialist
    Box 442350
    Moscow, ID 83844-2350

    208.262.2076 (voice)
    bgodfrey@uidaho.edu

  2. What's the catalog number I need to order this data set?

    Static Maps

  3. What legal disclaimers am I supposed to read?

    Although these data have been processed successfully on a computer system at the Idaho Geospatial Data Clearinghouse, no warranty, expressed or implied, is made regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty. 

  4. How can I download or order the data?

  5. Is there some other way to get the data?

  6. What hardware or software do I need in order to use the data set?

Back to Top

Who wrote the metadata?

Dates:
Last modified: 20070731

Metadata author:
Bureau of Land Management, Idaho State Office
GIS Specialist
Bureau of Land Management, Idaho State Office
1387 S. Vinnell Way
Boise, ID 83709
USA

208-373-4000 (voice)
208-373-3949 (FAX)
Hours of Service: 8-4;30, M-F, MST

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata(FGDC-STD-001-1998)

Metadata extensions used:
  • http://www.esri.com/metadata/esriprof80.html

  • Back to Top