Slope Effect on Fire Behavior of Idaho

Slope Effect on Fire Behavior of Idaho

Frequently-asked questions:


What does this data set describe?

Title:
Slope Effect on Fire Behavior of Idaho

Abstract:
Slope steepness was used to reflect effects on relative fire behavior.  It was assumed the steeper the slope, the higher the fire intensity, assuming other variables remain constant (weather; wind; structure, composition, and arrangement of fuels; fuel moisture, etc.).

BehavePlus was used to model the relationship of fire intensity and slope.  

Slope Class       Percent Slope   Fire Intensity Rating
1                        0-10%              Low
2                      10-30%              Low
3                      30-60%              Moderate
4                         >60%              High

Supplemental information:
The relationship between fire intensity and 4 slope classes was derived using BehavePlus.  Fire intensity values for two fire behavior fuel models (FBFM6 and FBFM10) and the midpoint of four slope classes (5, 20, 45, and 80%) were derived, and then estimates of fire intensity for each fuel model were averaged by slope class, and then standardized between 0.0 and 1.0 .  These standardized values were then used to reflect the effects of slope on fire behavior.

Slope Class        Slope Mid-point (%)            Standardized Fire Intensity
1	                      5                                        0.00
2	                    20                                        0.06
3	                    45                                        0.32
4	                    80                                        1.00

BehavePlus can be downloaded at
http://www.fs.fed.us/psw/topics/fire_science/craft/craft/Resources/Fire_models_tools.htm

  1. How should this data set be cited?

    Documentation "Idaho Interagency Assessment of Wildland Fire Risk to Communities" approved by Idaho State Fire Plan Working Group. Assessment completed by Jeff Jones, Landscape Ecologist, Flathead National Forest, Idaho State Fire Plan Working Group, 2007, Slope Effect on Fire Behavior of Idaho: U.S. Bureau of Land Management (BLM) , Boise, Idaho, USA .

    Online links:
  2. What geographic area does the data set cover?

    Bounding coordinates:
    West: -117.673841
    East: -110.513622
    North: 49.128909
    South: 41.852449

  3. What does it look like?

    Thumbnail image:

  4. Does the data set describe conditions during a particular time period?

    Calendar date: 2004
    Currentness reference:
    2004

  5. What is the general form of this data set?

    Geospatial data presentation form: map

  6. How does the data set represent geographic features?

    1. How are geographic features stored in the data set?

    2. What coordinate system is used to represent geographic features?

  7. How does the data set describe geographic features?

Back to Top

Who produced the data set?

  1. Who are the originators of the data set? (may include formal authors, digital compilers, and editors)

    • Documentation "Idaho Interagency Assessment of Wildland Fire Risk to Communities" approved by Idaho State Fire Plan Working Group. Assessment completed by Jeff Jones, Landscape Ecologist, Flathead National Forest
    • Idaho State Fire Plan Working Group

  2. Who also contributed to the data set?

    Jeff Jones, Landscape Ecologist, Flathead National Forest; Idaho State Fire Plan Working Group  

  3. To whom should users address questions about the data?

    Bureau of Land Management, Idaho State Office
    ID956 Geographic Sciences
    Bureau of Land Management, Idaho State Office
    1387 S. Vinnell Way
    Boise, ID 83709
    USA

    208-373-3967 (voice)
Back to Top

Why was the data set created?

These data were designed to characterize mid-scale patterns across Idaho of the the effects of slope on wildland fire intensity.   They were developed specifically for use in characterizing relative wildland fire hazard which was then used to assess the risks of wildland fire to communities.

This dataset was used in the "Idaho Interagency Assessment of Wildland Fire Risk to Communities, 2007", Map 5C .  It was created for the Statewide Interagency National Fire Plan Working Group to which the Bureau of Land Management (BLM), Idaho is a member.  It has also been used in other BLM planning efforts such as Resource Management Plans, Fire Management Plans, and NEPA analysis.

General Limitations

These data were designed to characterize mid-scale patterns across the state of Idaho at a scale of approximately 1:100,000.  The use of these data at scales less than 1:100,000 is not recommended without field verification.

Although the resolution of this theme is a 90-m cell, the expected accuracy does not warrant its use for geographic extents smaller than approximately 10,000 acres.  That is, these data were not designed to be used for "project level" assessments that typically require 1:24,000 scale data.

Back to Top

How was the data set created?

  1. Where did the data come from?

    Source scale denominator: Unknown
    Source contribution:
    Assumed derived from 30m DEMs

  2. What changes have been made?

    Date: Unknown (change 1 of 2)
    The relative effect of slope on fire intensity was derived from 4 classes of slope (breakpoints were at 10, 30, and 60 percent). These data were standardized between 0.0 and 1.0  (0.0, 0.06, 0.32, and 1.0).

    Person responsible for change:
    Jeff Jones
    Flathead National Forest
    Landscape Ecologist
    Flathead National Forest
    1935 3rd Av E
    Kalispell, MT 59906
    USA

    406-758-5341 (voice)
    Hours of Service: 8-4:30, M-F, MST

    Date: Unknown (change 2 of 2)
    Dataset Copied, Metadata Imported
    Source data projected from IDTM NAD27 to IDTM NAD83, nearest neighbor
    input
    projection transverse
    units meters
    datum nad27 nadcon
    parameters
    0.99960000
    -114 0 0.000
    42 0 0.000
    500000
    100000
    output
    projection transverse
    units meters
    datum NAD83 NADcon
    parameters
    0.9996000
    -114 0 0.000
    42 0 0.000
    2500000
    1200000
    End
    

    Person responsible for change:
    Bureau of Land Management, Idaho State Office
    GIS Specialist
    Bureau of Land Management, Idaho State Office
    1387 S. Vinnell Way
    Boise, ID 83709
    USA

    208-373-4000 (voice)
    208-373-3949 (FAX)
    Hours of Service: 8-4:30, M-F, MST

Back to Top

How reliable are the data; what problems remain in the data set?

  1. How well have the observations been checked?

    Unknown

  2. How accurate are the geographic locations?

    Unknown

  3. How accurate are the heights or depths?

  4. Where are the gaps in the data? What is missing?

  5. How consistent are the relationships among the observations, including topology?

    Unknown

Back to Top

How can someone get a copy of the data set?

Are there legal restrictions on access or use of the data?

Access constraints: Public
Use constraints:
No warranty is made by the Bureau of Land Management as to the accuracy, reliability, or completeness of these data  for individual use or aggregate use with other data.

These data were designed to characterize mid-scale patterns across the state of Idaho at a scale of approximately 1:100,000.  The use of these data at scales less than 1:100,000 is not recommended without field verification.

This data set is provided "as-is" without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness or a particular purpose.  The user assumes all responsibility for the accuracy and suitability of this dataset for a specific application.  In no event will the creators or USDA Forest Service be liable for any damages, including lost profits, lost savings, or other incidental or consequential damages arising from the use of or inability to use this data set.  Use of these data may require the ability to read ArcInfo Grid datasets.  

Although the resolution of the this theme is a 90-m cell, the expected accuracy does not warrant its use for geographic extents smaller than approximately 10,000 acres.  That is, these data were not designed to be used for "project level" assessments that typically require 1:24,000 scale data.

Distributor 1 of 1

  1. Who distributes the data set?

    Bruce Godfrey
    Idaho Geospatial Data Clearinghouse
    GIS Specialist
    Box 442350
    Moscow, ID 83844-2350

    208.262.2076 (voice)
    bgodfrey@uidaho.edu

  2. What's the catalog number I need to order this data set?

    Static Maps

  3. What legal disclaimers am I supposed to read?

    Although these data have been processed successfully on a computer system at the Idaho Geospatial Data Clearinghouse, no warranty, expressed or implied, is made regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty. 

  4. How can I download or order the data?

  5. Is there some other way to get the data?

  6. What hardware or software do I need in order to use the data set?

Back to Top

Who wrote the metadata?

Dates:
Last modified: 20070731

Metadata author:
Bureau of Land Management, Idaho State Office
GIS Specialist
Bureau of Land Management, Idaho State Office
1935 3rd Av
1387 South Vinnell Way
Boise, ID 83709
USA

208-373-4000 (voice)
208-373-3949 (FAX)
Hours of Service: 8-4:30, M-F, MST

Metadata standard:
FGDC Content Standards for Digital Geospatial Metadata(FGDC-STD-001-1998)

Metadata extensions used:
  • http://www.esri.com/metadata/esriprof80.html

  • Back to Top